DOVAMAN MS01A Miter Saw Stand - 22LB Lightweight, 330LB Capacity

I bought this last November. Black Friday deal I think. It's sat since then. So today I put it together. It's not super heavy duty but for the price it's pretty good. Good for the homeowner. I would consider it medium duty. It definitely beats looking for something to set your saw on every time you want to use it.

What a great tool. It has all of the features of the big boys but in a smaller compact body. I have wanted one of these for years but just did not have the space for one of those big, heavy and bulky tools. This one fits the bill perfectly!

It really does what those big tools do but without all of the bulk. It fits nicely into my small shed and is light enough to actually carry instead of using a dolly or wheels to move.

Comes with the complete tool. Basic main body, extension arms, roller/stop supports and detachable saw mount with mounting screws. It is simple to assemble. The main body has 4 legs that pull out and fold up for storage. They are retained in the closed position by a strong metal, spring loaded button. The saw mount is easily removed or installed by a set of levers and can be positioned anywhere along the rails of the main body of the tool.

Yep, I am loving this one as it makes working so much easier.

I hated having to using my miter saw. I'd get it off the wall and either set it on the ground or my truck tail gate. This stand has totally changed that. Super easy to assemble, I didn't even use the directions but did double check them to make sure I got it right. It was pretty intuitive though. I got my saw mounted to the brackets and attached to the stand. The mount brackets do have little plastic feet so you can use the saw on a flat surface without the stand. The length and height adjustable rollers work perfect to support the material being cut. I'm really impressed by this. I've used it for a couple small things and I have a project coming up that's going to really put it to use. Highly recommend!

This foldable saw stand is well constructed. It fits my 7 1/4" Compound Miter saw perfectly. The rails are simple to extend and raise. The saw mounts easily. The entire unit is lightweight but sturdy. It is an excellent addition to my workshop. I'm a fan!

This is very good saw table. Perfect for the home diy progect of for handyman business.
Combined very good with my dewalt saw.
Table is amazingly compact when folded.
Easy to open and set up. Once you attach saw to the clip rails, no need to remove it and those clip rails let you to take saw of the table in seconds. Same for installation
Arms adjust very wide, literally you can extend it like a foot passing max mark point. Of cause depends on the weight of material.
All hardware you would need are included.

This miter saw stand is a rather basic saw stand but don't let that fool you, it is well built providing a sturdy platform with 3 feet of adjustable support on both sides of your saw. Great for the small shop. The legs fold up to small size (36 X 10 X 7 inches). The only small complaint I have is the carriage bolts supplied to attach the saw to the stand are Metric and thin with washers that are undersized, I will replace this with a better quality bolt.

The frame is very solid and well done, rollers are very nice. I initially had an issue with my saw's holes not lining up as they were not in a straight line, but Dovaman's customer service got involved and solved my issue. This is one of the best experiences that I have had shopping online, They are great, like back in the days GREAT. Do note, that your mounting holes front to back need to be straight. There were no instructions, don't know if none comes withstand or they were just left out. I got it to work so all is well.

I have a Dovaman 10 Inch Dual Speed Compound Sliding Miter Saw. So, I expected this stand to fit my saw perfectly. Apparently this stand is made to accommodate other brands as well and therefore is not quite a perfect fit for my saw. The orange saw horse is heavy duty and folds easily but securely locks in place. The slide out wings fit well inside the channels and, like the rollers on each end, use a corner-mounted set screw to hold them in place.

The problem is the way the pedestal that mounts on the bottom of the miter saw, attaches to the saw. There are four 2 1/2" long M6 carriage bolts that are included to bolt the two railed pedestal to the saw. For my Dovaman saw, a lager diameter, shorter bolt would work better. However, the include bolts, though not perfect, do work. The larger issue is that the foot pads on the front legs of my Dovaman miter saw are not aligned with the holes where these bolts go. So when you tighten down these front bolts it twists the pedestal rails. Fortunately the back hole is aligned with the foot pad and can be firmly tightened. A person could add a shim to the front but I oped not to make the front bolts tight. This seems to work adequately for now but I may change it later.

The saw is fairly well centered on the saw horse and the pedestals' spring clamps are toward the front of the saw when it is mounted the way it seems to be pictured in the unclear assembly directions. However, it seems like the rollers do not really align with the working surface of the saw. I'll probably remove the pedestal rails and try putting them on the other direction, with the spring clamps at the back of the saw.

I like that the miter stand fits my miter saw perfectly and is fairly lightweight. Easy to extend and raise rails for long boards. It's pretty quick to put together and also take down for storage. It seems sturdy and well-built overall and I've been very happy with this purchase and the customer support.

Very nice miter stand well built, rugged working as designed

Tout ok 👍

This is a good stand, it’s close to the same you’d get from Harbor Freight. The only downside if you want to call it that is the outside diameter of the washers that comes with the mounting hardware to mount my Dovaman 12” dual bevel miter saw is to small. I had some larger O.D. Ones in my scrounge jar. Problem solved.

Stable and easy to setup. The rollers at either end are almost impossible to make level and finnicky to adjust, but for the money they are good enough.

I like the product very well

Great saw table if you don’t want to spend crazy money at LOWES or Home Depot.. easy set up..

It works perfect as advertised

You need this for your Dovaman miter saw... very sturdy and great quality.

I love it very good quality

Good

The stand is very sturdy and easy to adjust to all different lengths of material. I bought the dovaman 12" sliding ,dual bevel, miter saw to use with this stand. It easily attaches and unattaches from the stand. Very nice stand.

Very nicely built and works as advertised

My complaint is how the extensions are designed. They are mounted on different sides of the frame. So no matter how you position the rollers, one side barely holds material. If your cutting narrow material your ok. But If its 6" or wider the material hangs over the side of the roller